Configuration parameters
These records control the configuration of the digital signal processing. The readback (_RBV) values may differ slightly from the output values because of the discrete nature of the system clocks and MCA bins.
These parameters are contained in ketek.template.
EPICS record names |
Record types |
drvInfo string |
Description |
|---|---|---|---|
NumMCAChannels, NumMCAChannels_RBV |
mbbo, mbbi |
MCA_NUM_CHANNELS |
The number of MCA channels to use. Choices are 512, 1024, 2048, 4096, and 8192. |
BytesPerBin, BytesPerBin_RBV |
mbbo, mbbi |
KetekBytesPerBin |
The number of bytes per MCA bin. Choices are 1, 2, or 3. |
EnergyGain, EnergyGain_RBV |
ao, ai |
KetekEnergyGain |
The gain which controls the number of ADC units per MCA bin. Range is 0 to 100%. |
EnergyOffset, EnergyOffset_RBV |
ao, ai |
KetekEnergyOffset |
Offset for the energy to MCA bin calibration. Range is +-256 bins. |
FastPeakingTime, FastPeakingTime_RBV |
ao, ai |
KetekFastPeakingTime |
The peaking time of the fast filter in microseconds. |
FastGapTime, FastGapTime_RBV |
ao, ai |
KetekFastGapTime |
The gap time of the fast filter in microseconds. |
FastThreshold, FastThreshold_RBV |
ao, ai |
KetekFastFilterThreshold |
The fast filter threshold in arbiratry units in the range 0-16384. |
FastMaxWidth, FastMaxWidth_RBV |
ao, ai |
KetekFastFilterMaxWidth |
The maximum width of the fast filter in microseconds. |
MediumPeakingTime_RBV |
ai |
KetekMediumPeakingTime |
The peaking time of the medium filter in microseconds. |
MediumGapTime_RBV |
ai |
KetekMediumGapTime |
The gap time of the medium filter in microseconds. |
MediumThreshold, MediumThreshold_RBV |
ao, ai |
KetekMediumFilterThreshold |
The medium filter threshold in arbiratry units in the range 0-16384. |
MediumFilterEnable, MediumFilterEnable_RBV |
bo, bi |
KetekMediumFilterEnable |
Disable (0) or Enable (1) the medium filter. |
MediumMaxWidth, MediumMaxWidth_RBV |
ao, ai |
KetekMediumFilterMaxWidth |
The maximum width of the medium filter in microseconds. |
SlowPeakingTime, SlowPeakingTime_RBV |
ao, ai |
KetekSlowPeakingTime |
The peaking time of the slow filter in microseconds. |
SlowGapTime, SlowGapTime_RBV |
ao, ai |
KetekSlowGapTime |
The gap time of the slow filter in microseconds. |
ResetInhibitTime, ResetInhibitTime_RBV |
ao, ai |
KetekResetInhibitTime |
The time to wait after a reset event, range is 0-3.1875 microseconds. |
DynResetEnable, DynResetEnable_RBV |
bo, bi |
KetekDynResetEnable |
Disable (0) or Enable (1) the dynamic reset. |
DynResetThreshold, DynResetThreshold_RBV |
longout, longin |
KetekDynResetThreshold |
Dynamic reset threshold, range is 0-65535 ADC units. |
DynResetDuration, DynResetDuration_RBV |
ao, ai |
KetekDynResetDuration |
Dynamic reset duration, range is 0-819.19 microseconds. |
BaselineAverageLen, BaselineAverageLen_RBV |
mbbo, mbbi |
KetekBaselineAverageLen |
The number of baseline samples. Choices are 2, 4, 8, 16, 32, 64, 128, and 256. |
BaselineTrim, BaselineTrim_RBV |
mbbo, mbbi |
KetekBaselineTrim |
The number of baseline trim. Choices are Longest, Long, Medium, Short, and Shortest. |
BaselineCorrEnable, BaselineCorrEnable_RBV |
bo, bi |
KetekMediumFilterEnable |
Disable (0) or Enable (1) the baseline correction. |